Detection head size | φ5.4 |
---|---|
type | Cylindrical shield type |
Detection distance | 1.5 mm ± 10% |
Set distance | 0 to 1.05 mm |
Hysteretic | 10% or less of the detection distance |
Detectable object | Magnetic metal (Detection distance of nonmagnetic metal decreases) |
Standard detection object | Iron 5 × 5 × 1 mm |
Response frequency | 1.5 kHz (average value) |
Type of power supply | DC 2 wire type |
Power-supply voltage | 12 to 24 VDC (ripple (pp) 10% or less) |
Operating voltage range | 10 to 30 VDC |
Leak current | 0.8 mA or less |
Control output (switching capacity) | 5 to 100 mA |
Control output (residual voltage) | 3 V or less (load current 100 mA, when the cord length is 2 m) |
Indicator light | Operation indicator light (red), setting indicator light (green) |
action mode | No |
Protection circuit | Load short circuit protection, surge absorption |
Ambient temperature range | At use: -25 to 70 ° C Storage: -25 to 70 ° C (with no freezing) |
Ambient humidity range | When used: 35 to 95% RH Storage: 35 to 95% RH (with no condensation) |
Influence of temperature | Change in detection distance within the temperature range of -25 to + 70 ° C is within ± 20% (based on the detection distance at 23 ° C) |
Effect of voltage | Within the range of the rated voltage ± 15%, the change in the detection distance is within ± 2.5% (based on the detection distance at the rated power supply voltage) |
Insulation resistance | Between charging unit and casing: 50 MΩ or more (DC 500 V mega) |
Withstand voltage | Between charging unit and casing: AC 1000 V 50/60 Hz 1 min |
Vibration (durability) | 10 to 55 Hz Double amplitude 1.5 mm X, Y, Z direction 2 h |
Impact (durability) | 1000 m / s ** 2 X, Y, Z 10 times in each direction |
Protective structure | IEC standard: IP 67 Internal standard: oil resistant (sensor head part only) |
Connection method | Code pullout type (Cord length: 2 m) |
Mass (packing state) | Approximately 45 g |
Material | Case: Brass detection surface: ABS |
accessories | Instruction manual, amplifier mounting bracket |